CNC CNC machining, refers to the machining of parts on CNC machine tools, using digital information to control the displacement of parts and tools, is an effective way to solve the problems of variable varieties of parts, small batches, complex shapes, high precision and to achieve efficient and automated processing.
CNC machine tool processing and traditional machine tool processing process protocols in general is consistent, but because the CNC is a clamping, continuous automatic processing to complete all turning processes, so in the CNC machine tool processing needs to pay attention to some matters after completion.
CNC machining of optical parts
1, strictly comply with the safety operating procedures of CNC machine tools. Without professional training shall not operate the machine tool without authorization.
2, do a good job, good management of machine tools, with a strong sense of responsibility for the work.
3, the operator should wear good work clothes, work shoes, do not wear, wear dangerous clothing items.
4, generally do not allow two people to operate the machine at the same time. However, if a job requires two or more people to work together to complete, should pay attention to each other will be coordinated action.
Note after the completion of processing.
1, remove chips, wipe the machine tool, use the machine tool and the environment to maintain a clean state.
2, pay attention to check or replace the wear and tear on the machine guide oil wipe plate.
3, check the status of lubricating oil, coolant, add or replace in a timely manner.
4, in turn, turn off the power and total power supply on the machine tool operating panel.
5, is strictly prohibited on the chuck, between the top knocking, correction and correction of the workpiece, must confirm the workpiece and tool clamping before proceeding to the next step.
6, the machine tool on the insurance and safety guards, the operator shall not arbitrarily disassemble and move.
7, machine tool accessories and gauges, tools should be properly stored, keep intact and good, lost or damaged frame compensation.
8, the operator is strictly prohibited to modify the machine parameters. If necessary, you must notify the equipment manager, ask the equipment manager to modify.
